WATER CHEMISTRY LEVELS PRIOR TO START-UP

*ATTENTION INSTALLER*

PRIOR TO THE INSTALLATION OF THE NATURAL MINERAL PURIFICATION SYSTEM, IT IS ESSENTIAL THAT THE FOLLOWING WATER CHEMISTRY PARAMETERS HAVE BEEN ESTABLISHED.

TOTAL DISSOLVED SOLIDS (TDS)

IDEAL RANGE  750-1,500 PPM

IF TDS IS BELOW 750 PPM, RAISE BY ADDING CRUSHED ROCK SALT.
REFER TO FOLLOWING FORMULA: 10 LBS. OF SALT WILL RAISE TDS
120 PPM PER 10,000 GALLONS OF WATER.  IF TDS IS ABOVE 1,500 PPM, PARTIALLY DRAIN POOL (BY AT LEAST 1/3) AND REFILL WITH
FRESH WATER

pH (HYDROGEN POWER)

IDEAL RANGE:  7.2 – 7.6

CYANURIC ACID (STABILIZER)

IDEAL RANGE:  0 – 30 PPM

HALOGEN

IDEAL RANGE:  .4 PPM CHLORINE - .8 PPM BROMINE

*STATE, LOCAL OR PROVINCIAL HEALTH CODES MAY VARY

TOTAL ALKALINITY

IDEAL RANGE:  80 – 120 PPM

CALCIUM HARDNESS

IDEAL RANGE:  225 – 375 PPM